For hotels, resorts and water parks
Save up to 60% of the energy your pumps use
$0 upfront option: you only pay us from what we help you save.
Works with your existing pumps. Our global partner network has achieved savings of up to 60% across 300+ installations. Results depend on site conditions.
Part of a global partner network
Backed by 17 years of energy efficiency industry experience, our global network has delivered solutions for some of the world’s most recognised brands.
The problem
Your pumps may be costing you more than they should
Rising CFE bills
Pumps are among your biggest energy users.
Pumps at full speed, 24/7
Many pumps run flat out while a valve holds the flow back. It’s like flooring the accelerator and controlling your speed with the brake.
Wasted money
You pay for that extra energy every month, and it adds nothing to your operation.
Wear and maintenance
Running flat out all day works your equipment harder than it needs to.
of a pump’s lifetime cost is the electricity it uses
According to Grundfos²
Who we help
Built for sites that rely on pumps
We serve hotels, resorts, water parks, farms and industrial sites across Mexico.
- Hotels & resorts
- Water parks
- Farms & ranches
- Industrial sites
- Water treatment
- Hospitals
- Spas & hot springs
The solution
EcoPulse technology: less energy, same operation
A smart controller between your switchboard and your pump.
Mounted on the wall
A compact unit mounted on the wall, between the electrical switchboard and the pump.
Like cruise control for your pump motor
It matches your motor’s speed to what your operation actually needs, instead of running flat out all the time.
Nothing is fitted on your pump or motor
You can repair or replace them any time; the unit keeps working.
European and South African hardware
Hardware sourced from Europe and South Africa, backed by our global partner network.
We don’t just fit a device. We tune your whole system to what it actually needs.
How it works
Three steps, with clear numbers
Assess
We review your pumps, operating hours and CFE bills, and measure current consumption.
Optimize
We install and program EcoPulse so each pump uses only the energy it needs.
Verify
We measure consumption after installation and report your verified savings.
Performance monitoring available
Monitoring and reporting can be included in your project
Where it suits your site, performance monitoring can be added so you can follow your pumps’ energy use and savings. We agree the monitoring and reporting scope with you in the assessment.
15 kW→ 9 kW
Illustrative example: one 15 kW pump, 24 h a day, MXN $2.40/kWh.
Results
Hear it from clients of our global partner network
A partner, not just an installer.
Our success depends on your savings. That’s why we stay with you for years, keeping everything running smoothly and finding new ways to save, so you can reinvest more in your business.
Why it matters
How to save one third of global energy
Pumps and motors move the water behind almost every hotel, water park and industrial site. Small inefficiencies add up to a huge share of the electricity they pay for.
Lovins explains that half the world’s electricity runs motors, and a quarter runs pumps and fans. With better design of the whole system, about a third of the world’s electricity could be saved.
“If the world needs dramatically more electricity, why are we allowing so much of the electricity we already generate to be wasted?”
of the world’s electricity is used by electric motor systems (IEA)¹
Slowing a pump by 20% can lower the power it needs by about half (US DOE)³
The IEA expects global electricity demand to rise by around 40% by 2035.⁵ Every kWh your pumps stop wasting is one you never have to pay for.
Figures from independent sources (IEA, Grundfos, US DOE). Every AhorraFlow project starts by measuring a baseline; your results will depend on your site.
Illustrative example
How much could you save?
Enter your pump details for an instant estimate.
How we estimate this
We multiply your total pump power (kW) by your daily operating hours, your average cost per kWh and 365 days to get your yearly pump electricity cost.
The savings slider (20 to 60%) applies an estimated EcoPulse saving, assuming pumps at full load. It's an estimate, not a quote. Real savings depend on your site, which is why we measure first.
Want an exact figure?
Book your free energy assessmentUSD shown at approx. 1 USD = 18.50 MXN; estimate only.
Illustrative estimate: assumes pumps at full load and is not a quote. Actual savings are confirmed in the assessment. Use the average cost per kWh from your CFE bill.
Book your free energy assessmentFunding
Two ways to pay for your project
Buy it outright
You own the equipment from day one and keep all of the savings.
Paid from your new savings
- We pay for EcoPulse and the installation.
- You pay nothing upfront.
- You only pay us from what we help you save.
Split agreed per client. Subject to assessment.
What’s the catch? Why would you pay for the equipment?
There’s no catch. With shared savings, we earn from the savings we measure, so it’s in our interest to get you the biggest savings possible.
How much will I actually save?
It depends on your site. The “up to 60%” refers to the energy your pumps use, not your total electricity bill, and depends on site conditions and your existing equipment. We confirm your real figure in the free assessment, using your actual bills.
What if the savings are lower than you estimated?
Before we install anything, we measure your pumps and show you the savings we expect. If the real results come in lower, we review and adjust the system to get closer to the expected savings. With shared savings you only pay us from what we help you save.
How do I know the savings are real?
We measure your consumption before installation to set a baseline, then a data logger records it afterwards. You see the before and after numbers, and you can check them against your CFE bill.
Do I have to replace my pumps?
No. We work with the pumps you already have. We don’t replace pumps. We install EcoPulse, programmed around what your operation actually needs.
Which facilities benefit most?
Anywhere pumps or motors run longer or harder than the job requires: hotels and resorts, water parks, farms, industrial sites, pools, hospitals, commercial buildings, irrigation and municipal water systems.
Does it suit every pump?
Not always. Pumps with constant demand or a high lift may save less. The free assessment tells you honestly whether your site is a good fit.
Is this just selling VFDs?
No. At its core EcoPulse uses variable speed technology, but it isn’t a standard drive. The hardware is sourced from Europe and South Africa, and it is backed by 17 years of energy efficiency industry experience across our wider network. We also measure a baseline and verify your real savings; ongoing monitoring can be included. For reference, the typical range with variable speed drives on pumps is 20 to 50% (ABB)⁴.
Will EcoPulse make my pump quieter?
In most cases, yes. EcoPulse lets your pump run only as fast as it needs to, so it usually runs quieter, though it won’t make it silent.
What’s involved in the free energy assessment?
We look at your CFE bills and how your pumps run to estimate how much energy could be avoided. It costs nothing and commits you to nothing. Email contacto@ahorraflow.mx or use the contact form.
How does the $0 upfront option work?
We install EcoPulse with no upfront payment. While the agreement runs, AhorraFlow receives an agreed share of the savings measured against your baseline. No capital investment needed. Subject to assessment.
Does it apply if my CFE tariff is GDMTO or GDMTH?
Yes. On GDMTO you pay a single price per kWh plus monthly demand charges in kW, so lowering your pumps’ energy use and demand can lower those charges. On GDMTH, energy has different prices in base, intermediate and peak periods, and the capacity charge is based on your demand during peak hours, so savings in those hours count the most. We review it with your real bills during the assessment.
Will it affect my pool or process?
The goal is to keep the performance you need (flow, pressure, filtration) while using less energy. We define this in the assessment before installing anything.
Will it affect my rides or attractions?
Guest safety, ride throughput and water quality come first. We design the control around each attraction and your opening hours, then verify performance after installation.
What if I want to stop using it?
We remove EcoPulse and your pumps go back to running exactly as they did before. Nothing about your original system is changed.
Will it disrupt my operation while you install it?
We plan the installation around your schedule to keep downtime to a minimum.
What happens if something breaks?
Our local team supports your system, and we agree your ongoing service and regular reviews with you during the assessment. If something needs attention, we fix it.
Who owns the equipment?
On shared savings, AhorraFlow owns and looks after the equipment while the agreement runs. If you buy it outright, it’s yours from day one.
Contact
Every month you wait, your savings go to the power company.
Save energy. Grow your business.
- Free energy assessment, no obligation.
- $0 upfront option: you only pay us from what we help you save.
- Works with your existing pumps.
Or email contacto@ahorraflow.mx